Serving the Portland area  ·  (207) 618-6493  ·  Open Mon-Sun 7am-7pm
📞 (207) 618-6493 Free Quote

Tar & Chip Driveways in Portland, ME | Chip Seal Paving

Tar and chip holds up well on the hilly lots around Falmouth and Scarborough where full asphalt costs more.

✅ Written Estimates & Tonnage Specs 🛡️ Fully Insured 💸 Free Quote 24h ⭐ 24 Google reviews
+24Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates & Tonnage Specs
Tar & Chip Driveways Portland

Tar and chip driveways in Portland offer a budget-friendly, durable surface option for homeowners on the hillside lots of Munjoy Hill, the Western Promenade, and the steeper residential neighborhoods where granite and schist bedrock sit close to the surface. Unlike full asphalt paving, which requires a substantial aggregate base and multiple courses, tar and chip uses a sprayed oil binder and crushed stone chips rolled into a solid, shed-water surface that holds up well on shorter, angled cuts into ledge and on the clay-prone flats around Back Cove and the Fore River. We spray binder, spread stone chips, and roll it flat so the surface sheds the spring thaw, frost heave, and the salt air that eats at edges near the harbor. For many Portland homeowners, tar and chip delivers the durability you need at a fraction of the cost of hot mix asphalt.


Why Tar and Chip Works on Portland's Hilly Driveways

Portland's residential terrain is unforgiving. The Western Promenade and Munjoy Hill sit on bedrock within a few feet of the surface, leaving little room for a full asphalt base course. Down around Back Cove and the Fore River, glacial marine clay holds water all winter, heaves under frost, and softens in the spring thaw, cracking conventional slabs and opening alligator cracking along plow-damaged edges. Tar and chip is engineered for exactly these conditions: it sheds water quickly, flexes with frost movement, and costs significantly less than a full hot mix installation on steep or short lots where base preparation would be expensive or impossible.

  • We apply a liquid oil binder to your existing gravel or compacted base, then spread and roll crushed stone chips into a solid, weather-resistant surface.
  • The material sheds spring thaw water and stands up to freeze-thaw cycles that crack rigid asphalt on clay-heavy soils.
  • Installation is faster than hot mix paving, and you can drive on the surface within 24 to 48 hours in most weather.
  • Tar and chip typically costs 40 to 50 percent less per square foot than full asphalt paving, making it the right choice for budget-conscious homeowners on steep or short driveways.
  • The surface is easily repaired: small chips can be topped up without tearing out the whole driveway.

For homeowners in Falmouth, Scarborough, Westbrook, and the outer Portland neighborhoods where lots are longer and flatter but budgets are tight, tar and chip delivers real durability at a real price.

Key info: Tar and chip is not sealed asphalt. It is an oil-bound aggregate surface that ages gracefully over 5 to 7 years and may require a light chip top-up in year 3 or 4. This is normal and expected, not a sign of failure. If your driveway sits on stable, well-draining base, tar and chip will outlast many homeowners' tenure in the house.

For more on how tar and chip compares to other surface options, see our guide to asphalt driveway paving and installation and recycled asphalt and millings driveways.


How We Install Tar and Chip Driveways in Portland

Tar and chip installation is straightforward but must be done right. We start by inspecting your existing driveway or base, filling ruts and low spots, and ensuring the surface is clean and dry. We then spray the oil binder in a controlled, measured application, spread the crushed stone chips evenly, and roll everything flat with a heavy roller so the chips embed into the binder and bond together. The key is getting the binder rate and chip distribution right so you end up with a solid, shed-water surface that does not ravel or track chips onto your lawn.

  • We inspect your existing base or gravel surface and repair any soft spots, ruts, or drainage issues before applying binder.
  • We spray the oil binder at the correct rate per square foot, ensuring even coverage across the entire driveway.
  • We spread crushed stone chips uniformly and roll the surface with a heavy roller until the chips are fully embedded and the surface is smooth and solid.
  • We allow 24 to 48 hours of dry weather before you drive on the driveway, depending on temperature and humidity.
  • We provide written tonnage specifications and material rates on every estimate, so you know exactly what you are getting.

The installation typically takes one day for a residential driveway in Portland or the surrounding towns, and you can resume normal use within two days in good weather.

Example: A 600-square-foot driveway in South Portland with an existing compacted gravel base takes about 4 to 6 hours to prep, bind, chip, and roll. A longer driveway in Westbrook or Falmouth may take a full day, but the process is the same. We measure the surface on site, calculate the tonnage of chips and the gallons of binder needed, and give you a firm estimate before we start.

Learn more about how we approach driveway repair and gravel driveway installation and grading, which often precede a tar and chip application.


Tar and Chip Installation Methods

Approach Description Best For
Tar and Chip on Compacted Gravel We spray oil binder directly onto an existing, well-draining gravel base, spread chips, and roll flat. No excavation or base removal required. Existing gravel driveways in good condition, short hillside lots, budget-conscious homeowners, areas with poor drainage or clay soils.
Tar and Chip on Prepared Base We grade, level, and compact the existing surface, fill low spots, and then apply binder and chips. Includes minor grading and drainage work. Driveways with ruts, soft spots, or uneven settling, lots where water pools at the entrance or along edges.
Tar and Chip Over Existing Asphalt We clean and prepare an old asphalt surface, spray binder, and apply chips. The old asphalt acts as a stable base. Not suitable if the asphalt is badly cracked or heaving. Aging asphalt driveways that are sound but worn, homeowners who want to extend the life of an old surface at low cost.
Tar and Chip with Grading and Drainage We reshape the driveway to improve water shedding, compact a new base, and apply binder and chips. Includes culvert or swale work at the street line if needed. Driveways on clay soils, hillside lots with erosion or water pooling, properties where drainage is the main problem, HOA or municipal requirements for improved grading.

Tar and Chip Driveways Cost in Portland: What to Expect

Tar and chip driveways typically cost starting at $5 per square foot for a straightforward application on an existing, stable gravel or compacted base. A 600-square-foot driveway might run $3,000 to $3,500 before any grading or base work. If your driveway requires grading, drainage improvements, or repair of soft spots, the cost will be higher. The main factors that affect the final price are the size of the driveway, the condition of the existing base, whether water drainage work is needed, and the type and quality of the stone chips you choose.

Getting two or three written estimates from local contractors is always smart. Each estimate should include the square footage of the driveway, the gallons of binder per square foot, the tons of chips, and any base preparation work. A firm that gives you a price without measuring on site or specifying tonnage is cutting corners. We provide written estimates and tonnage specifications on every job, and our estimate is free and carries no obligation to book.

For a full breakdown of pricing across all our services, including tar and chip, see our pricing overview. If you are comparing tar and chip to full asphalt paving or resurfacing, our asphalt resurfacing and overlay page explains the cost and durability trade-offs.


Tar and Chip Driveways Near Me: What Portland Homeowners Should Know When Hiring

Hiring the right contractor for tar and chip work matters. Start by verifying that any contractor you call is fully insured and can provide a certificate of insurance on request. Ask for references from recent jobs in Portland, South Portland, Westbrook, or Falmouth, and call at least two. A good contractor will measure your driveway on site, explain what base preparation is needed, and give you a written estimate before any work begins. Maine law requires any home construction contract over $3,000 to be in writing and signed before work starts, so insist on that. If your driveway is near a property line or if your neighborhood has HOA rules, check those requirements before you book, and ask your contractor if they are familiar with local permitting.

  • Ask for a written estimate that includes square footage, binder rate, chip tonnage, and any base preparation or grading work.
  • Request references from homeowners in Portland or nearby towns who have had tar and chip work done in the past two years.
  • Verify that the contractor is fully insured and ask to see a certificate of insurance naming you as an additional insured.
  • Confirm that the contractor understands your city or town's permitting rules for driveway work, especially if your driveway touches the street line or a protected area.
  • If you live in an HOA community, check the architectural standards or deed restrictions to ensure tar and chip is an approved surface before you sign a contract.
  • Never pay a large cash deposit upfront. A reasonable deposit is 25 to 33 percent, with the balance due upon completion.
  • Avoid any contractor who shows up unsolicited at your door, offers a price that seems too good, or refuses to put the scope and price in writing.

We have been in business since 2009, and we hold full insurance coverage for all our paving work. Call us at (207) 618-6493 for a free, no-obligation estimate. We will measure your driveway on site, discuss your base and drainage situation, explain what tar and chip will and will not do for your property, and give you a firm price before we start work.

For more guidance on choosing a contractor and avoiding paving scams, visit our contact page to request an estimate or call us directly.

Tar & Chip Driveways in Portland: Pricing Guide

ServicePriceDetails
Tar and Chip on Existing Gravel BaseStarting at $5/sq ftBinder and chips applied to stable, compacted gravel. No excavation. Square footage and chip quality determine final cost.
Tar and Chip with Base Prep and GradingStarting at $6.50/sq ftIncludes grading, compaction, and drainage work before binder and chips. Water pooling or clay soils drive cost higher.
Tar and Chip Over Existing AsphaltStarting at $4.50/sq ftCleaning and preparation of old asphalt surface, then binder and chips. Only if asphalt is sound. Badly cracked asphalt requires removal.
Tar and Chip with Drainage and Culvert WorkOn estimateIncludes swale, culvert, or curb cut work at street line. Municipal permitting required. Site inspection and local rules determine scope and price.
Travel and EstimateFreeIncluded in Portland and surrounding service areas. No mileage fee. Free written estimate within 24 hours of request.

Indicative pricing, the exact cost depends on square footage, finish, and site access. Free personalized estimate within 24h at (207) 618-6493.

Frequently asked questions: Tar & Chip Driveways in Portland

How much does tar and chip driveway cost in Portland?
Tar and chip typically starts at $5 per square foot for a straightforward application on an existing stable base. A 600-square-foot driveway might run $3,000 to $3,500. If grading or drainage work is needed, the cost will be higher. We provide free written estimates with square footage, binder rate, and chip tonnage specified. Call (207) 618-6493 for a no-obligation quote.
What is the difference between tar and chip and asphalt paving?
Tar and chip uses a sprayed oil binder and crushed stone chips rolled into a solid surface. Asphalt is hot mix material laid in multiple courses over a compacted base. Tar and chip costs 40 to 50 percent less and works well on steep or short driveways with limited base room. Asphalt is more durable on flat, high-traffic surfaces and lasts longer in heavy use. Both shed water and stand up to Portland's freeze-thaw cycles, but asphalt requires a thicker base.
How long does it take to install a tar and chip driveway in Portland?
A residential tar and chip installation typically takes one full day from start to finish. A 600-square-foot driveway takes 4 to 6 hours. Larger driveways or those requiring grading and drainage work may take a full day or more. You can drive on the surface within 24 to 48 hours in dry weather. We schedule jobs based on weather forecast and allow adequate curing time before you resume normal use.
Can tar and chip be applied over my old asphalt driveway?
Yes, if the old asphalt is structurally sound and not badly cracked or heaving. We clean and prepare the surface, then spray binder and apply chips. The old asphalt acts as a stable base. However, if the asphalt is alligatoring, has extensive cracks, or is heaving due to frost or clay movement, tar and chip will not hold and the asphalt should be removed or overlaid with hot mix. We assess the condition on site and recommend the best option.
How long will a tar and chip driveway last in Portland?
Tar and chip typically lasts 5 to 7 years before the surface begins to age and may benefit from a light chip top-up. On well-draining, stable bases, it can last longer. The material ages gracefully and does not crack like rigid asphalt on frost-heave soils. Maintenance is simple: fill any small potholes with additional chips and binder, and keep gutters clear so water does not pool on the surface. Proper drainage is the key to long life.
Do I need a permit to install a tar and chip driveway in Portland?
Permits for driveway work are set by your city or town. Portland and most surrounding municipalities require permits if the work involves the street line, curb cuts, culverts, or if the driveway is widened or extended. If your driveway is entirely on your property and does not touch the street, a permit may not be required, but you should check with your local building department before you start. We help homeowners navigate local permitting and can advise on what your city requires.
What is the best time of year to have tar and chip installed in Portland?
Late spring through early fall is ideal. Tar and chip requires dry weather for the binder to cure and the chips to embed properly. Avoid installation during heavy rain, frost, or when the ground is frozen or saturated. Spring thaw season, when clay soils are soft and water pools on driveways, is actually the time when many homeowners decide to upgrade their surfaces. We can often schedule work within a week or two during the busy season. Call (207) 618-6493 to discuss timing for your property.
Is tar and chip a good choice for steep driveways on Munjoy Hill or the Western Promenade in Portland?
Yes, tar and chip is ideal for steep, short driveways on bedrock-heavy lots. Because the material requires less base preparation than full asphalt, it is cost-effective on hills where excavation and base work would be expensive. The surface sheds water quickly and flexes with frost movement on granite and schist terrain. Many homeowners on Portland's hills choose tar and chip to save 40 to 50 percent on paving costs while still getting a durable, shed-water surface.
Can tar and chip be repaired if it develops potholes or worn spots?
Yes. Small potholes or worn areas can be patched by cleaning the spot, applying fresh binder, and topping with new chips. You do not have to tear out the entire driveway. This is one of the advantages of tar and chip over rigid asphalt. After 5 to 7 years, you may want a light chip top-up across the whole surface to refresh the appearance and extend life. We can assess your driveway and recommend repair or top-up work on site.
Are you fully insured for tar and chip driveways in Portland?
Yes, we carry full insurance coverage for all our paving work, including tar and chip installation, base preparation, and grading. We can provide a certificate of insurance on request. Maine does not issue state licenses for asphalt paving or general contracting, but all home construction contracts over $3,000 must be in writing and signed before work begins. We follow this law and all local permitting rules. Call (207) 618-6493 or visit our contact page to request a free estimate and insurance certificate.
← Back to services
Why choose us?

Trusted professionals since 2009

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Verified client reviews

24+ Verified Client Reviews in Portland

⭐⭐⭐⭐⭐ 4.9/5 · 24 verified Google reviews

Free Quote

Get Your Free Quote

Asphalt Paving in Portland · Response within 24h · No commitment · ☎ (207) 618-6493

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Portland ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm